Description
Carrier – TP-E33-3SP1 1/3HP 115V 1075RPM Direct Drive Blower Motor
Carrier TP-E33-3SP1 is an universal fixed fractional direct drive blower motor. The motor has 115V single phase, 5amp draw and 1/3HP. Side shell mount, pre-drilled to accept Rheem mounting plate, end plate drilled to accept Rheem or Trane mounts. Rugged ball bearing design capable of handling high ambient conditions and excessive radial and axial loading. 48Y frame 5″ keyed shaft 1/2″ diameter and dynamic self aligning bearing, reversible direction. If you are not sure whether this replacement kit fits your unit, contact us with your model and serial number.
Features:
- 5Amp
- 115V
- Speeds – 800, 950, 1075
- 10mf 370 or 440V capacitor
Specifications:
Weight | 12.37 Pounds (lbs) |
Width | 5.625 Inches (In) |
Height | 5.625 Inches (In) |
Country of Origin | MEX |
Length | 5.652 Inches (In) |
Amps | 5 |
Bearing Type | Self Aligning (SAB) |
Capacitor MFD µF | 10 |
Cycle/Hertz | 60 Hz |
Duty | Continuous |
Enclosure | Open Air Over (OPAO) |
Full Load Amps | 5 |
Insulation Class | Class B |
Lead Length | 36″ |
Motor HP | 1/3 HP |
Motor Type | PSC |
NEMA Frame | 48Y |
Number of Bearings | 2 |
Number of Poles | 6 |
Number of Speeds | Three |
Phase | Single |
Prop 65 | No |
Protection | Automatic |
Rotation | Reversible |
RPM | 1075 |
Service Factor | 1 |
Shaft Diameter | 1/2″ |
Shaft Length | 5″ |
Thermal Protection | Yes |
Voltage | 115 VAC |
Warranty Offered | Yes |
Reviews
There are no reviews yet.